Ultra-Cut XT'

Previous
Next

Ultra-Cut XT

The following items have been added to your list


x

Ultra-Cut® XT技术可提供新一代的高生产率和更高灵活性,并增强人们对高精度等离子切割的信心。Ultra-Cut® XT系统为增强切割能力带来更多灵活选择,并且确保卓越的质量、更高的生产率和更低的切割成本。Ultra-Cut® XT系统可提供130至400安培输出,切割板厚达50 mm。其性能可与任何碳钢切割设备匹敌,并且在有色金属上具有卓越的切割性能。如果采用Ultra-Cut® XT,您完全无需担忧是否选择了合适的系统。 下一代高精度等离子切割设备将会按照您的方式工作 - 智能化。


推荐

  • 更优的切割质量意味着更高的能效
  • 更高的生产率会实现更大的利润
  • 水雾保护工艺 (WMS) 优化有色金属切割
  • 附加的灵活性 - 可随着切割需求的增加而扩展
  • 可靠性 - 您可以信赖的性能
  • XT Torch割炬技术 – 最快速的易损件更换
  • ScrapCutter选项(使用手持割炬切割剩余的金属骨架)


Ultra-Cut XT

Documents


额定输入

Model Ultra-Cut 130 XT Ultra-Cut 200 XT Ultra-Cut 300 XT Ultra-Cut 400 XT
安培 43 A
41 A
34 A
65 A
62 A
52 A
97 A
93 A
77 A
144 A
137 A
114 A
频率 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
相数 3 3 3 3
电压 V 380 V
400 V
480 V
380 V
400 V
480 V
380 V
400 V
480 V
380 V
400 V
480 V

额定输出

Model Ultra-Cut 130 XT Ultra-Cut 200 XT Ultra-Cut 300 XT Ultra-Cut 400 XT
条件性声明 Duty Cycle (@ 104ºF / 40º C)
Duty Cycle (@ 104ºF / 40º C)
Duty Cycle (@ 104ºF / 40º C)
Duty Cycle (@ 104ºF / 40º C)
电流上限 130 A
200 A
300 A
400 A
电流下限 5 A 5 A 5 A 5 A
暂载率 100 %
100 %
100 %
100 %
输出电流,直流(DC) 130 A
200 A
300 A
400 A
VDC 输出 180 VDC
180 VDC
180 VDC
200 VDC
输出功率 20 kW
40 kW
60 kW
80 kW

切割规格

型号 Ultra-Cut 130 XT Ultra-Cut 200 XT Ultra-Cut 300 XT Ultra-Cut 400 XT
条件性声明 Mild Steel
Stainless Steel
Aluminum
Mild Steel
Stainless Steel
Aluminum
Mild Steel
Stainless Steel
Aluminum
Mild Steel
Stainless Steel
Aluminum
刺穿 0.75 in. (20 mm)
0.625 in. (15 mm)
0.75 in. (20 mm)
1.5 in. (40 mm)
1 in. (25 mm)
1 in. (25 mm)
1.75 in. (45 mm)
1.25 in. (30 mm)
1.25 in. (30 mm)
2 in. (50 mm)
2 in. (50 mm)
2.25 in. (60 mm)
最大边缘起弧(公制) 1.5 in. (40 mm)
1.5 in. (40 mm)
1.5 in. (40 mm)
2.5 in. (65 mm)
2 in. (50 mm)
2 in. (50 mm)
3 in. (75 mm)
2 in. (50 mm)
2 in. (50 mm)
3.5 in. (90 mm)
4 in. (100 mm)
3.5 in. (90 mm)

工作参数

型号 Ultra-Cut 130 XT Ultra-Cut 200 XT Ultra-Cut 300 XT Ultra-Cut 400 XT
应用等级 CSA, CE, CCC

CSA, CE, CCC

CSA, CE, CCC

CSA, CE, CCC
工作气体,等离子 Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000
Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000
Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000
Air, O2, Ar-H2, N2 @ 120 psi (8.3 bar) and Ar for marking with DFC 3000
工作气体,保护 Air, N2, O2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)
Air, N2, O2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)
Air, N2, O2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)
Air, N2, O2, Ar-H2 @ 120 psi (8.3 bar), H20 @ 10 GPH (0.6 l/min)
开路交流电压(VAC)高 425 VAC

425 VAC

425 VAC

425 VAC
x
x
x

x

Loading..